Press “Apiart” for manufacturing wax
This model press, designed by renowned Gym shoes “Apiart”, engaged in the production of various equipment that is sold in Europe. The press makes it possible to produce wax two standardized sizes
- Ruta – 420h220 mm
- Dadan – 410h260 mm
The processing of the 1st kilogram of wax, you get 10 sheets of wax type “Dadan”
Work with press
First, install the press in a horizontal position, it is desirable to use level. On the one hand, the press has a special thread on the legs that help you fix it on the table. Cooling of the wax produced by cold water supply pipes in the cooling media which are under his covering. Passing through it, the water will cool quickly and evenly wax. Water should not be very hot and should not be made under great pressure to avoid decompression device.
In operation, the press will come out the excess wax that collects in the tray installed underneath (pallet included). Also comes with pressure measuring cup that allows you to measure the amount of uniformly filled with wax. To work with the press not desirable to use a large spatula to cut excess wax frozen on the sides and lift the finished sheet wax.
wax casting process of the press is very simple. It should raise the top cover, opening angle of 100-120 ° on the lower part, and pour the right amount of wax using a measuring cup. No need to pour wax all in one place, it is desirable to pour it over the greatest possible area of the press.
cooling one sheet wax is approximately 1-2 minutes, often depends on several factors, temperature of melted wax, the temperature of water supplied to the cooling system. Before removing wax, you must first open the top cover using the small lever on the left, then completely open the lid using the handle on the top.
With this press, you can conduct your own wax without additives and other applications. This Wax is much better accepted by bees, and contributes to building better WTO, cutting the purchase wax.
Press can receive from 40 to 60 sheets per hour of pure wax.
Do not carry out disassembling the press, reverse assembly will be impossible.
If you have additional questions, call us, we will be happy to answer them for